Hand tool #7 of 15
Hand saw
by Edward J. Thunderbird
Cuts wood anywhere, with no power and no noise.
Why choose a hand saw
A good modern hand saw cuts a 2x4 in under a minute. It works where there is no power, makes small cuts faster than setting up a power saw, and a Japanese pull saw makes very clean cuts for finish work.
Power version: a circular saw, miter saw or table saw.
What it is used for
- Cross-cutting boards
- Ripping (along the grain) with a rip saw
- Flush cuts and joinery with a pull saw
- Pruning and rough cuts
How to use it
- Mark your line and support the board so the cut does not pinch.
- Start with a few short pull strokes to make a groove.
- Saw at about a 45 degree angle with long, easy strokes; let the saw do the work.
- Support the waste piece near the end so it does not tear off.
Safety
- Keep your guiding thumb above the teeth, not beside the blade.
- Cover the teeth when you carry or store it.
Maintenance: keep it working
- Wipe the blade with a little oil to stop rust.
- Modern hardpoint saws cannot be sharpened; replace when dull.
- Traditional saws can be sharpened with a saw file.
What to look for when you buy
- 15 to 20 inch for general carpentry
- Hardened (hardpoint) teeth stay sharp longer
- A Japanese ryoba pull saw for fine cuts
Where to buy it and what it costs
Typical price: $15 to $60. Three good choices:
Budget
Irwin Marathon 15 inch hand saw
about $15 to $20
Sharp and fast.
Best value
Stanley SharpTooth 20 inch saw
about $20 to $30
Cuts on push and pull.
Pro
Gyokucho ryoba Japanese pull saw
about $40 to $60
Very clean cuts, rip and crosscut edges.
Shop for any hand saw
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.