Building a shed: power tools vs. hand tools only
An 8 by 12 foot storage shed is the best first building project. Here is what each step takes with power tools, and with hand tools only.
Step by step
| Step | Power tools | Hand tools only | Tip |
|---|---|---|---|
| Base | Circular saw, Impact driver, Cordless drill/driver | Hand saw, Tape measure, Level, Speed square, Wrenches and sockets | Level a gravel pad or concrete blocks; treated 4x4 or 4x6 skids. |
| Floor | Circular saw, Framing nailer, Impact driver | Hand saw, Claw hammer, Speed square, Chalk line | 2x6 joists 16 inches apart; 3/4 inch treated plywood. |
| Walls | Circular saw, Miter saw, Framing nailer | Hand saw, Claw hammer, Speed square, Level, Pry bar (flat bar) | Build each wall flat, stand it up, plumb and brace it. |
| Roof | Circular saw, Framing nailer, Jigsaw | Speed square, Hand saw, Claw hammer, Chalk line | Cut one rafter pair, test-fit, then copy it. |
| Roofing | Circular saw, Framing nailer (or a roofing nailer) | Claw hammer, Utility knife, Chalk line | Drip edge, underlayment, then shingles or metal. |
| Siding, door and trim | Circular saw, Jigsaw, Cordless drill/driver, Impact driver, Miter saw | Hand saw, Claw hammer, Level, Screwdrivers, Block plane, Brace and bit | T1-11 or LP SmartSide panels go up fast. |
The shed going up, in pictures
Step 1: Base
Power tools: Circular saw, Impact driver, Cordless drill/driver
Hand tools only: Hand saw, Tape measure, Level, Speed square, Wrenches and sockets
Level a gravel pad or concrete blocks; treated 4x4 or 4x6 skids.
Step 2: Floor
Power tools: Circular saw, Framing nailer, Impact driver
Hand tools only: Hand saw, Claw hammer, Speed square, Chalk line
2x6 joists 16 inches apart; 3/4 inch treated plywood.
Step 3: Walls
Power tools: Circular saw, Miter saw, Framing nailer
Hand tools only: Hand saw, Claw hammer, Speed square, Level, Pry bar (flat bar)
Build each wall flat, stand it up, plumb and brace it.
Step 4: Roof
Power tools: Circular saw, Framing nailer, Jigsaw
Hand tools only: Speed square, Hand saw, Claw hammer, Chalk line
Cut one rafter pair, test-fit, then copy it.
Step 5: Roofing
Power tools: Circular saw, Framing nailer (or a roofing nailer)
Hand tools only: Claw hammer, Utility knife, Chalk line
Drip edge, underlayment, then shingles or metal.
Step 6: Siding, door and trim
Power tools: Circular saw, Jigsaw, Cordless drill/driver, Impact driver, Miter saw
Hand tools only: Hand saw, Claw hammer, Level, Screwdrivers, Block plane, Brace and bit
T1-11 or LP SmartSide panels go up fast.
Time and cost compared
| Power tools | Hand tools only | |
|---|---|---|
| Time, two people | About 2 to 3 weekends | About 4 to 6 weekends |
| Tool cost | About $900 to $1,500 (or less if you own a drill) | About $300 to $500 |
| Power needed | Batteries or an extension cord | None |
| Skill | Beginner-friendly | Beginner-friendly; sharp saws help a lot |
Rough estimates for an 8x12 shed with a simple gable roof; materials cost extra (often $2,000 to $4,000 in 2026).
The tool kits and what they cost
Power tool kit for a shed
| Tool | Good-value pick | Price |
|---|---|---|
| Cordless drill/driver | DeWalt 20V MAX drill and impact driver combo kit | about $150 to $200 |
| Circular saw | DeWalt 20V MAX brushless 7-1/4 inch circular saw (tool only) | about $150 to $200 |
| Miter saw | DeWalt 12 inch sliding compound miter saw (DWS779) | about $350 to $400 |
| Jigsaw | Bosch JS470E corded jigsaw | about $130 to $160 |
| Framing nailer | Metabo HPT 21 degree pneumatic framing nailer (NR90AES1) | about $200 to $260 |
| Total | about $980 to $1,220 |
Already own a drill? Rent or borrow the miter saw and framing nailer to cut the cost.
Plus the hand tools every build needs
| Tool | Good-value pick | Price |
|---|---|---|
| Tape measure | Stanley FatMax 25 ft | about $22 to $28 |
| Speed square | Swanson 7 inch Speed Square | about $10 to $15 |
| Level | Johnson or Empire 48 inch box-beam level | about $40 to $60 |
| Chalk line | Milwaukee or Irwin speed-rewind chalk reel | about $15 to $25 |
| Utility knife | Milwaukee Fastback folding knife | about $15 to $20 |
| Claw hammer | Estwing 16 oz steel hammer with vinyl grip | about $30 to $40 |
| Total | about $132 to $188 |
Hand tools only: the kit for a shed
| Tool | Good-value pick | Price |
|---|---|---|
| Claw hammer | Estwing 16 oz steel hammer with vinyl grip | about $30 to $40 |
| Tape measure | Stanley FatMax 25 ft | about $22 to $28 |
| Speed square | Swanson 7 inch Speed Square | about $10 to $15 |
| Level | Johnson or Empire 48 inch box-beam level | about $40 to $60 |
| Chalk line | Milwaukee or Irwin speed-rewind chalk reel | about $15 to $25 |
| Utility knife | Milwaukee Fastback folding knife | about $15 to $20 |
| Hand saw | Stanley SharpTooth 20 inch saw | about $20 to $30 |
| Pry bar (flat bar) | Estwing 15 inch pry bar | about $20 to $30 |
| Brace and bit | Vintage brace plus an Irwin auger bit set | about $60 to $110 |
| Block plane | WoodRiver low-angle block plane | about $80 to $110 |
| Total | about $312 to $468 |
Add two clamps and a rip saw if you rip boards by hand.
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.