Power tool #12 of 15
Rotary hammer (SDS)
by Edward J. Thunderbird
Drills concrete and stone with ease, and chisels tile and mortar.
Why choose a rotary hammer (sds)
A regular hammer drill struggles in concrete. A rotary hammer uses a piston to hit the bit hard, so it drills concrete, block and stone quickly. Most can also stop rotating and work as a small jackhammer for tile and mortar.
Hand alternative: a star drill or masonry bit and a heavy hammer (very slow).
What it is used for
- Holes for anchors, bolts and sill plates in concrete
- Running pipe and wire through foundations
- Chiseling off tile, thinset and stucco
- Rebar dowels into footings
How to use it
- Use SDS-plus bits; they just click in.
- Pick the mode: rotation only (wood/metal), hammer drill (concrete), or hammer only (chisel).
- Mark depth with tape on the bit.
- Let it work; heavy pushing slows it. Pull out often to clear dust.
Safety
- Concrete dust contains silica: use a mask (N95 or better) or a vacuum attachment.
- Glasses and hearing protection.
- Use the side handle; a jammed bit twists the tool hard.
Maintenance: keep it working
- Grease the bit shanks.
- Keep the bit holder clean.
What to look for when you buy
- SDS-plus (the common size)
- Three modes
- Clutch that slips if the bit jams
Where to buy it and what it costs
Typical price: $80 to $400. Three good choices:
Budget
Harbor Freight Bauer 1 inch SDS-plus rotary hammer
about $70 to $100
Good for a few dozen holes.
Best value
Bosch Bulldog Xtreme rotary hammer (11255VSR)
about $200 to $240
The classic, corded.
Pro
Milwaukee M18 FUEL 1 inch SDS-plus rotary hammer (tool only)
about $300 to $380
Cordless power for concrete.
Shop for any rotary hammer (sds)
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.