Hand tool #3 of 15
Speed square
by Edward J. Thunderbird
Draws square and angled lines, and lays out roof rafters.
Why choose a speed square
This triangle of aluminum marks a perfect 90 or 45 degree line across a board in a second, guides a circular saw for square cuts, and the degree and rafter scales lay out roof pitches and stairs. Add a 24 inch framing square for big layouts.
Power version: a miter saw makes square and angled cuts directly.
What it is used for
- Square lines across boards
- 45 degree cuts
- Guiding a circular saw
- Roof rafter angles
- Checking corners for square
How to use it
- Hook the lip over the edge of the board.
- Draw along the edge for a 90 degree line.
- Pivot on the pivot point to read angles on the degree scale.
- Hold it tight against the board and run the saw base along it as a guide.
Safety
- None special; it is one of the safest tools.
Maintenance: keep it working
- Keep it from getting bent or dented; check it against a known square now and then.
What to look for when you buy
- 7 inch aluminum for most work, 12 inch for wider boards
- Clear, stamped markings (not printed)
Where to buy it and what it costs
Typical price: $8 to $30. Three good choices:
Budget
Johnson 7 inch rafter square
about $8 to $12
Accurate and cheap.
Best value
Swanson 7 inch Speed Square
about $10 to $15
The original.
Pro
Swanson 7 and 12 inch set plus a 24 inch framing square
about $40 to $55
Everything for roof and stair layout.
Shop for any speed square
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.