Power tool #3 of 15
Circular saw
by Edward J. Thunderbird
The saw that builds houses: cuts boards and plywood fast and straight.
Why choose a circular saw
A 7-1/4 inch circular saw cuts 2x lumber in one pass and rips plywood sheets. It is the main cutting tool for framing, decks, sheds and roofs, and it goes to the work instead of bringing the work to a saw.
Hand alternative: a crosscut or rip hand saw.
What it is used for
- Cutting 2x4s, 2x6s and joists to length
- Ripping and cross-cutting plywood and OSB
- Cutting rafters and stair stringers
- Bevel cuts up to 45 to 56 degrees
- With a masonry blade: scoring brick, block and pavers
How to use it
- Mark your line and support the board on both sides of the cut so the waste can fall away.
- Set the blade about 1/4 inch deeper than the board.
- Line up the notch on the base with your mark, waste side of the line.
- Start the saw before the blade touches the wood, then push smoothly; do not force it.
- For long straight cuts, clamp a straightedge or use a guide rail.
Safety
- Never pull the saw backward while it is cutting.
- Keep the blade guard working; never pin it open.
- Stand to the side of the saw, not behind it, in case of kickback.
- Glasses and hearing protection.
Maintenance: keep it working
- Change the blade when it burns or smokes the wood: a 24-tooth framing blade costs about $10 to $20.
- Blow sawdust out of the guard so it snaps back freely.
- Check that the base is square to the blade.
- Corded saws: check the cord and brushes.
What to look for when you buy
- 7-1/4 inch blade (the standard size)
- Corded is cheapest and never runs out; cordless 18/20V brushless is now nearly as strong
- Electric brake stops the blade fast
- Worm-drive (heavy, more torque) if you frame a lot
Where to buy it and what it costs
Typical price: $60 to $400. Three good choices:
Budget
Skil 7-1/4 inch corded circular saw (5280-01)
about $50 to $70
Corded, light, laser guide.
Best value
DeWalt 20V MAX brushless 7-1/4 inch circular saw (tool only)
about $150 to $200
Cordless framing power.
Pro
Skilsaw 7-1/4 inch worm drive (SPT77WML)
about $180 to $230
The classic framer's saw.
Shop for any circular saw
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.