Impact driver
Drives long screws and lag bolts that would stall a drill.
Why choose a impact driver
An impact driver looks like a short drill, but when the screw gets hard to turn it adds thousands of quick hammer blows per minute. That drives 3 inch deck screws and 6 inch lag screws easily without twisting your wrist. It is lighter and shorter than a drill, so it fits in tight spaces.
Hand alternative: a long screwdriver or a ratchet and socket for lag screws, with a pilot hole drilled first.
What it is used for
- Deck and fence screws
- Lag screws into posts and beams
- Removing stuck bolts and screws
- Driving screws all day without wrist strain
- Nut drivers for metal roofing screws
How to use it
- Use only 1/4 inch hex-shank bits; impact-rated bits last much longer.
- Push the bit firmly into the screw head and start slowly.
- Let it hammer; do not lean on it with your full weight.
- Ease off as the screw head reaches the surface so it does not sink too deep.
- Hearing protection: it is loud when it hammers.
- Glasses: bits can snap.
- Keep your other hand away from the screw path.
Maintenance: keep it working
- Same battery care as a drill.
- Blow out the vents.
- Replace worn bits: a rounded bit strips screw heads.
What to look for when you buy
- Same battery brand as your drill
- Brushless motor
- Three speed settings for small and big screws
- Bare tool (no battery) is cheap if you already have batteries
Where to buy it and what it costs
Typical price: $80 to $250. Three good choices:
Ryobi ONE+ HP brushless impact driver
about $80 to $110
Plenty for decks and home projects.
DeWalt 20V MAX XR impact driver (tool only)
about $130 to $170
Strong and compact.
Milwaukee M18 FUEL impact driver (tool only)
about $170 to $220
One of the strongest; four modes.
Shop for any impact driver
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.