Cordless drill/driver
Drills holes and drives screws. If you buy one power tool, buy this one.
Why choose a cordless drill/driver
A drill/driver drills holes in wood, metal, plastic and (with the right bit) brick, and it drives screws. The clutch lets it stop turning before a screw sinks too deep or strips. Cordless 18 or 20 volt models now do almost everything a corded drill did, and the battery runs every other tool in that brand's line.
Hand alternative: a brace and bit for holes, and a screwdriver for screws.
What it is used for
- Drilling pilot holes and clearance holes
- Driving screws for decks, cabinets, shelves and hinges
- Boring holes for wires and pipes with spade or auger bits
- Mixing paint or thinset with a mixer paddle
- Hole saws for doorknobs and recessed lights
How to use it
- Charge the battery and pick the bit: twist bits for holes, a #2 Phillips or square bit for screws.
- Set the clutch: a low number for small screws, higher for big ones, the drill symbol for holes.
- Pick the speed: 1 (low) for screws, 2 (high) for drilling.
- Hold it square to the work with steady pressure, and start slowly.
- For big holes, clamp the work; the drill can twist hard if the bit grabs.
- Wear safety glasses; chips and bits can break.
- Clamp small parts; never hold them in your hand while drilling.
- Watch for wires and pipes before drilling into walls.
Maintenance: keep it working
- Blow dust out of the vents now and then.
- Keep batteries out of extreme heat and cold; store them about half charged for long periods.
- Wipe the chuck and open and close it to keep it working smoothly.
- Replace dull bits; a dull bit overheats the drill and burns the wood.
What to look for when you buy
- 18 or 20 volt, brushless motor (longer run time and life)
- 1/2 inch chuck
- Two batteries, so one charges while you work
- Pick a battery brand you will stay with: the batteries are the expensive part
- A drill/impact combo kit is usually the best deal
Where to buy it and what it costs
Typical price: $60 to $250. Three good choices:
Ryobi ONE+ 18V drill/driver kit
about $60 to $90
Huge line of tools on one battery; fine for home use.
DeWalt 20V MAX drill and impact driver combo kit
about $150 to $200
Two tools, two batteries, a charger and a bag.
Milwaukee M18 FUEL hammer drill kit
about $250 to $330
Very powerful; the hammer mode drills brick and block.
Shop for any cordless drill/driver
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.