Farm and ranch tool #2 of 10
T-post driver
by Edward J. Thunderbird
Drives steel T-posts for wire fence, fast.

Why choose a t-post driver
Steel T-posts hold up most barbed and woven wire fences. A post driver is a heavy steel tube with handles: slide it over the post and slam it down. Ten or so hits drive a post.
Power version: a gas or pneumatic post driver, or a tractor-mounted driver.
What it is used for
- Building barbed wire and woven wire fence
- Temporary and electric fence posts
- Garden trellis and tomato posts
- Driving ground rods and stakes
How to use it
- Stand the post up on your line, with the spade (flat plate) facing the direction of the fence.
- Slide the driver over the top, lift it with both hands and drive it down.
- Keep the post straight by checking it with a level after a few hits.
- Drive until the plate is buried, about 18 to 24 inches.
Safety
- Wear gloves, safety glasses and ear protection; it is loud.
- Do not lift the driver off the top of the post; it can hit your head.
- Wear a hard hat if the post is tall; use a step or short post.
Maintenance: keep it working
- Keep the inside free of mud and rust.
- Check the welds on the handles.
What to look for when you buy
- Heavy (15 to 20 lb) for hard ground; lighter for soft soil
- Two handles welded on solidly
- A length that fits the posts you use
Where to buy it and what it costs
Typical price: $25 to $70. Three good choices:
Budget
Tractor Supply or Harbor Freight T-post driver
about $25 to $35
Gets the job done.
Best value
Speeco or Behlen heavy-duty post driver
about $40 to $55
Heavier: fewer hits.
Add-on
T-post puller
about $40 to $70
Pulls posts out without bending them.
Shop for any t-post driver
Prices are typical U.S. store prices checked November 17, 2026. They change often with sales; check the store. Tools Critical is not paid by any store or brand.